Features
- Single bidirectional 75Ω cable interface with on-chip termination
- On-die connection between equalizer and cable
- SMPTE ST 2082-1, ST 2081-1, ST 424, ST 292-1 and ST 259 compliant input/output
- Multi-standard operation from 1Mb/s to 11.88Gb/s
- Supports reclocking for DVB-ASI at 270Mb/s and MADI at 125Mb/s
- 3D Input Signal Eye Monitor
- PRBS Generator and Checker
- Automatic cable equalization. Typical equalized cable lengths of Belden 1694A cable:
- 70m at 11.88Gb/s
- 80m at 5.94Gb/s
- 170m at 2.97Gb/s
- 240m at 1.485Gb/s
- 400m at 270Mb/s
- Cable Equalizer Mode Features:
- Improved reach with stress patterns
- Manual or automatic power-down on loss of signal
- Programmable carrier detect with squelch threshold adjustment
- Manual and automatic Cable Equalizer Bypass
- Cable Driver Mode Features:
- Wide swing control
- Pre-emphasis to compensate for significant insertion loss between device output and BNC
- Manual or automatic power-down on loss of signal
- Manual or automatic Mute or Disable on LOS
- Trace Equalizer Features:
- Integrated 100Ω differential input termination
- Manual or automatic power-down on loss of signal
- Adjustable carrier detect threshold
- DC-coupling from 1.2V to 2.5V CML logic
- Trace Equalization to compensate for up to 20” FR4 at 11.88Gb/s
- Automatic input offset compensation
- Trace Driver Features:
- Integrated 100Ω differential output termination
- DC-coupling from 1.2V to 2.5V CML logic
- Trace Driver data output pre-emphasis to compensate for up to 20” FR4 at 11.88Gb/s
- Manual or automatic Mute or Disable on LOS
- Reclocker features:
- Manual or automatic rate modes
- Manual or automatic Reclocker Bypass
- Wide-range Loop Bandwidth control
- Reclocking at the following data rates: 125Mb/s, 270Mb/s, 1.485Gb/s, 2.97Gb/s, 5.94Gb/s, and 11.88Gb/s. This includes the f/1.001 rates.
- Additional Features:
- Single 1.8V power supply for analogue and digital core
- 2.5V for Cable Driver output supply
- 1.2V, 1.8V, or 2.5V for Trace Driver output supply
- GSPI serial control and monitoring interface
- Four configurable GPIO pins for control or status monitoring
- Wide operating temperature range: -40ºC to +85ºC
- Small 6mm x 4mm 40-pin QFN
- Pin compatible with the GS12090 and GS3590
- Pb-free/Halogen-free/RoHS & WEEE compliant
Reviews
There are no reviews yet.